Model: Compact - I - Output Production: 150 gpd up to 800 gpd |
Small
|
-
Compact design requires minimal installation space
-
Designed for municipal/tap water source
-
Quality components utilized for system construction
-
Designed for optimum water recovery
-
Quick and easy system installation
-
Available for pressure or open tank applications
-
12-month (one year) factory warranty
Standard Features:
- Thin film composite membrane
- PVC membrane housing
- Powder-coated steel bracket
- Inlet and outlet pre-filter gauges
- S.S. waste & recycle fixed flow control
- High pressure brass comp. fittings
- Storage tank pressure switch
- Low-pressure switch
- Feed water inlet solenoid valve
- 1/2 hp 50/60 hz motor
- Rotary vane pump
- 10" 5 micron sediment pre-filter (1)
- 10" carbon block pre-filters (2)
- Salt rejection 95-99%
Options:
- Float switch for atmospheric storage tank
- Stainless steel pump
- Stainless steel membrane housing
- Fiberglass panel for wall mount design
- Additional pre-treatment
- Automatic hourly flush
- Manual flush
- 220 volt motor
- Adjustable waste valve
|
Model: Wall Mount - Output Production 450gpd up to 6,000 gpd |
|
Medium
WM140 thru WM340
WM450 thru WM800
|
-
Fiberglass panel wall mount design eliminates need for valuable floor space
-
Designed for municipal/tap water source, operating system pressure at 200 psi
-
Quality components utilized for system construction
-
Dependable electro-mechanical relay logic control circuit
-
Dual-level tank switches and controls
-
Plumbed for optimum water recovery
-
12-month (one year) factory warranty
Standard Features:
- Fiberglass wall mount panel
- Stainless steel pump (WM140-340)
- Thin film composite membrane
- PVC membrane housing
- High-pressure nylon tubing
- Liquid-filled high pressure gauge
- Liquid-tight wire shrouding
- Feed water inlet solenoid valve
- Stainless steel fixed flow control, waste & recycle (WM450 only)
- Adjusbl. waste & recycle needle valves (WM800 thru WM340)
- Product & waste flow meters, (WM800 thru WM340)
- 5 micron pre-filter (shipped separate)
- Inlet and outlet pre-filter gauges
- High-pressure brass comp. fittings
- Salt rejection 95-99%
- Shipping crate for WM140 - WM340
Standard Electrical Controls:
- NEMA 4 fiberglass enclosure
- Off/On switch
- Dual level float switches
- Low pressure switch
- Low pressure bypass delay
- Fused control circuit
- 24 volt level control circuit
- Time delay start
- 30 amp motor contactor
Lights: power, running, low pressure, tank full
Options:
- Stainless steel membrane housings
- Automatic hourly flush
- Manual flush
- TDS monitor (digital or analog)
- Hour meter
- Recycle flow meter
- Tank pressure switch (product)
- Product diversion
- IEC contactor, with overload
- S.S. needle valves (WM800 thru WM340)
- Adjustable needle valves (WM450)
- High pressure cut-off w/auto restart and manual override
- Pre-treat lock-out with light
- 50 hz electrical requirement
- Other options available upon request
|
Model: Frame Mount Vertical - Output Production: 800 gpd up to 10,800 gpd |
|
Large
Typical Model with Options
Typical Standard Model
|
-
Floor standing model with durable powder-coated frame
-
Designed for municipal/tap water source, operating system pressure at 200 psi
-
Quality components utilized for system construction
-
Dependable electro-mechanical relay logic control circuit
-
Dual-level tank switches and controls
-
Plumbed for optimum water recovery
-
12-month (one year) factory warranty
Standard Features:
- Powder-coated steel frame
- Stainless steel multi-stage pump
- thin film composite membrane
- PVC membrane housing
- High-pressure nylon tubing
- Liquid-filled high pressure gauge
- Liquid-tight wire shrouding
- Feed water inlet solenoid valve
- Adjstbl. waste & recycle needle valves
- Product & waste flow meters
- 5 micron pre-filter
- Inlet and outlet pre-filter gauges
- High-pressure brass comp. fittings
- Salt rejections 95 - 99%
Standard Electrical Controls:
- NEMA 4 fiberglass enclosure
- Off/On switch
- Dual level float switches
- Low pressure switch
- Low pressure bypass delay
- Fused control circuit
- 24 volt level control circuit
- Time delay start
- 30 amp motor contactor
Lights: power, running, low pressure, tank full
Options:
- Stainless steel membrane housings
- Automatic hourly flush
- Manual flush
- TDS monitor (digital or analog)
- Hour meter
- Recycle flow meter
- Tank pressure switch (product)
- Product diversion
- IEC contactor, with overload
- Stainless steel needle valves
- High pressure cut-off w/auto restart and manual override
- Pre-treat lock-out with light
- 50 hz electrical requirement
- Shipping crate
- Other options available upon request
|
